2185 cold peeling and matt mold release film for heat transfer sticker

1)product information

Product name: 2185 matte,cool peel release film screen printing(back coating)

Product model:2185

Product specification:48*64cm,( 55035828,For 50micron:NG.32.3KG/ctn,0.027CBM)

39*54cm(For 50micron:NG.22.5KG/ctn,0.027CBM)

44*60cm,500pcs/Bag,2 bags/ctn

                              Thickness: 50um,70um,,100um(Special specifications can be customized)

Product features:2185 is matte and cool peel release film,the heat  transfer temperature between 130-150 ℃, the heat transfer effect completely, and no residual color.Is the commonly usedheat Transfer Film substrate on the heat transfer market at present. Because of the back coating the adhering  layer, Can prevent the adhesion failure of products from long distance transportation and pressure.And isolation of paper and transportation costs can be saved. Through multi-channel applicator precision processing and become, quickly absorb ink layer, high surface smoothness, can reach 175-210 line network printing, no matter fine patterns or colors printing can achieve the ideal effect.

2) application manual:

1. Apply to printing:Only suitable for the matte and cool peel of screen printing products.

2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric

3.Peeling method: cold peeling  

4. Applicableheat transfer material: water (301, 305 series heat  transfer). Oily (JB W series heat transfer ink, HMA, 529, 530, 531 series heat transfer glue). Weak sublimation offset printing ink, etc.

5. Applicable Heat Transfer Sticker level:A,B,C,D,E,F(According to the Kenteer company standard)

3)Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and  production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and  production, avoid contact with hot objects

4.When printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water, oily silk screen printing ink

7.After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bit of film  not accurate

8.Before transfer the image,cut out the other parts of the blank and with 2 mm border.

9.Transfer temperature:130℃-150℃,Trnsfer time:6-15s  Press:20-30 pounds

10. Machine time out, lift or move the machine heating panel, after product cooling tore away from the film, the effect is better.

11.In the  general situation, open the surface packaging as a printing surface

12. This material belongs to the defence of the sticky materials, but should add a proof sticker of heat transfer sticker finished product packaging.

13.Products need to be stored in a temperature: 0 ℃ to 35 ℃, relative humidity: 30% - 30% of the environment to avoid light preservation. Products for a period of 36 months (the original packaging and unopened), more than warranty please use after test.

14. The above technical data is based on Kenteeer tests and is believed to be correct, please evaluate and test first, Kenteer clear statement does not bear the liability for occasional or incidental loss.